Reversed filament drives

Post Reply
Posts: 1
Joined: Thu Apr 25, 2019 3:13 pm

Reversed filament drives

Post by degan » Thu Apr 25, 2019 3:17 pm

It appears that all 4 quad filament drives are reversed. When I tell it to extrude it pushes it back, If I tell it to retract it feed into the head. Any comments?

Posts: 52
Joined: Tue Sep 11, 2018 4:41 pm

Re: Reversed filament drives

Post by TheBum » Fri Apr 26, 2019 11:42 am

Do you have the correct config files for your printer?

Stepper cables are typically designed to support flipping the connector over to reverse direction. If you can't find a solution through config files, then you can try that. Which printer are you using?

Posts: 8
Joined: Mon Apr 22, 2019 2:28 pm
Location: Texas
Discord Handle: @nukelhead
Owned M3D Printers: ProMega

Re: Reversed filament drives

Post by nukelhead » Fri Apr 26, 2019 3:04 pm

I have a Promega Quad that did the same thing out of the box. I flipped all the extruder connectors on the board and it solved the problem.

Post Reply