Recommended Calibrations

Post Reply
ktapper
Posts: 10
Joined: Sun Oct 07, 2018 7:47 pm

Recommended Calibrations

Post by ktapper » Sun Oct 14, 2018 8:45 pm

Below are the common methods for calibrating different items on the Promega and associated system file you are changing:

XYZ step calibration
https://www.thingiverse.com/thing:2484766

File name: machine_axissteps.g

Extruder Steps
http://print.theporto.com/posts/how-to- ... der-steps/

File name: machine_extruderstep.g

There are many more these are the basic for dimensional that I found useful

Qwelldrin666
Posts: 2
Joined: Tue Jun 11, 2019 3:26 pm

Re: Recommended Calibrations

Post by Qwelldrin666 » Thu Jul 04, 2019 2:37 pm

HI The Extruder esteps are changed in machine_extruderstep.g and changes are saved but M92 command shows no changes, Does the Duet need to be power cycled for changes to be actioned.
If so its a bit of a pain to wait for the nozzle to cool and heat for every estep calibration.

Is there a way to get the board to re-read the machine_extruderstep.g file before extruding?

Post Reply