Page 1 of 1

Recommended Calibrations

Posted: Sun Oct 14, 2018 8:45 pm
by ktapper
Below are the common methods for calibrating different items on the Promega and associated system file you are changing:

XYZ step calibration
https://www.thingiverse.com/thing:2484766

File name: machine_axissteps.g

Extruder Steps
http://print.theporto.com/posts/how-to- ... der-steps/

File name: machine_extruderstep.g

There are many more these are the basic for dimensional that I found useful

Re: Recommended Calibrations

Posted: Thu Jul 04, 2019 2:37 pm
by Qwelldrin666
HI The Extruder esteps are changed in machine_extruderstep.g and changes are saved but M92 command shows no changes, Does the Duet need to be power cycled for changes to be actioned.
If so its a bit of a pain to wait for the nozzle to cool and heat for every estep calibration.

Is there a way to get the board to re-read the machine_extruderstep.g file before extruding?