Assembly of the Crane

Post Reply
mvwijland
Posts: 2
Joined: Sat Aug 17, 2019 12:39 pm

Assembly of the Crane

Post by mvwijland » Sat Aug 17, 2019 12:48 pm

Does any one have some video’s as to how to assemble the quadcrane? I have already assembled the printer, but I run into some problems. For instance, the printed is very loose. It can move sideways, it tilts, rocks. Is this on purpose or is there a way to fix the bed?

If someone knows of a video guiding users through the assembly of the printer, it would be much appreciated.

mvwijland
Posts: 2
Joined: Sat Aug 17, 2019 12:39 pm

Re: Assembly of the Crane

Post by mvwijland » Sun Aug 18, 2019 7:46 am

OK, after some digging into various sources online, I found out that the bed can be adjusted by turning the bolt attached to one of the v wheels. Doing so, firmly attached the bed to the frame and it still allows for the printer bed to smoothly run down the y-axis. Item resolved.
Last edited by mvwijland on Mon Aug 19, 2019 4:04 pm, edited 1 time in total.

TheBum
Posts: 51
Joined: Tue Sep 11, 2018 4:41 pm

Re: Assembly of the Crane

Post by TheBum » Mon Aug 19, 2019 12:07 pm

I had the same issue with the head when I got mine. It was wobbling pretty badly on the X rail.

Post Reply